GW Instek GOM-804 - Page 74

MEASUREMENT
75
Hold example
Hold: The results of the previous tests are held until the
current test has completed.
Previous results
held
New results
Trigger
Ready
EOT
Pass
Fail
High
Low
EOT falling
edge
EOT rising
edge
Previous
results
1. Select External
I/O setting
From one of the main screens, press
the
ESC
key so that the menu
system at the bottom of the display
has focus.
Go to System and press Enter.
Go to Utility and press Enter.
Go to External I/O and press
Enter.
System
menu icon
Move
Select menu
or setting
Enter
2. External I/O
menu appears
Use the arrow keys to choose Handler Mode and press
Enter.
Use the arrow keys to set the handler mode. Press Enter
to confirm the setting.
Handler Mode
Handler Mode
HOLD, CLEAR
Note
Pressing ESC before pressing ENTER will exit from the
Handler Mode setting.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com