GW Instek GOM-805 - Select Measuring Signal (Drive)

MEASUREMENT
33
Select Measuring Signal (Drive)
Background
Resistance measurement has 5 different measuring signals
that can be applied to obtain a resistance measurement:
DC+, DC-, Pulse, PWM, Zero.
Note
The drive function is only applicable to the GOM-805.
The drive signal for the GOM-804 is fixed to DC+.
1. Select Drive
Press the
Drive
key and use the up and down arrow
keys to select a drive signal.
Drive mode
Drive selection
indicator
Set drive signal
Drive Range
DC+, DC-, Pulse, PWM, Zero
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com