GW Instek GOM-805 - Temperature Measurement

GOM-804 & GOM-805 User Manual
50
Temperature Measurement
Background
The temperature measurement function uses the optional
PT-100 temperature probe. The measured temperature is
displayed on the display. For more information on the
optional PT-100 sensor, see the appendix on page 149.
There is only one range for the temperature function.
However the resistance measurement range can still be
changed when in the temperature function.
Note:
The temperature measurement function is used in
conjunction with the Ohm measurement function. The
two measurements share the same display, so the Ohm
readings stay on the display even after the temperature
measurement function is activated. Thus when the
Temperature function is selected, “Ohm+T” is shown as
the selected function.
1. Select the
Temperature
function
Press
TEMP
to enter the temperature measurement
function.
Temperature + Ohm
function indicator
(Ambient)
temperature
source
Resistance measurement
Ambient
temperature
The temperature is displayed on the Ohm display.
2. Select the
temperature
units
From the bottom menu, go to Meas. Setup>Temperature
Unit and select ºC or ºF.
See page 65 for setting details.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com