GW Instek GOM-805 - Scan Overview; Scan Scan Overview

GOM-804 & GOM-805 User Manual
82
Scan Overview
Background
The Scan function is used to automatically bin groups of
up to 100 components. The associated pins in the handler
interface are active when the Scan function is activated.
There are a total of 6 outputs, 3 inputs as well as a GND
and power (+5V) pin.
Interface and pin
assignment
25Pin D-SHELL
(Female)
HANDLER / SCAN / EXT I/O
Pin Assignment
Relay
Controls the relay output.
Pass
Pass signal. Indicates the compare result
is IN(pass).
Low
Low signal. Indicates a LO compare
result.
High
High signal. Indicates a HI compare
result.
Clock
The clock signal will pulse high when
each group of output signals (Relay,
Pass, Low, High) are ready. There are up
to 100 groups of output signals
STRB
After all (100) output groups are ready,
the STRB signal will pulse high.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com