GW Instek GOM-805 - Pin Definitions for Handler Interface

HANDLER/SCAN INTERFACE
81
13
Bin5
High when the binning sorting result
is within the bin5 setting range.
Binning
Out
15
Userdefine2
High or low when the user define2
logic conditions are met.
Compare,
Binning
Out
16
Userdefine1
High or low when the user define1
logic conditions are met.
Compare,
Binning
Out
19
VEXT
External DC Voltage, acceptable
range is +5V.
In
20
Ready
High when the measurement has
finished. The instrument is ready for
the next trigger.
Ext
trigger
mode
Out
21
Bin6
High when the binning sorting result
is within the bin6 setting range.
Binning
Out
22
Low
High when the compare result is
deemed LO.
Compare
Out
23
Bin7
High when the binning sorting result
is within the bin7 setting range.
Binning
Out
24
Bin8
High when the binning sorting result
is within the bin8 setting range.
Binning
Out
25
Bin Out
High when the binning sorting result
is out of all the bin setting ranges.
Binning
Out
For backwards compatibility with the GOM-802 handler interface, please see
page 89.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com