GW Instek GPP-2323 - Page 138

GPP Series User Manual
138
Command
:DELAy[1|2]:CYCLEs?
Function
Queries the cycle number of Delay.
Example
:DELAy2:CYCLEs?
Return to I or N, <value> for CH2 (For example:
N,100)
Command
:DELAy[1|2]: ENDState {ON|OFF|LAST}
Function
Sets the termination state of Delay.
Description
ON|OFF|LAST
ON: output enabled
OFF: output disabled
LAST: stay at the last group of output state.
Example
:DELAy2: ENDState OFF
Sets the termination state of Delay as output
disabled for CH2.
Command
: DELAy[1|2]: ENDState?
Function
Queries the termination state of Delay.
Description
ON|OFF|LAST
ON: output enabled
OFF: output disabled
LAST: stay at the last group of output state.
Example
:DELAy2: ENDState?
Return the termination state of Delay for CH2.
Command
:DELAy[1|2]:GROUPs <NRf>
Function
Sets the output number of Delay.
Description
<NRf> 1 - 2048