GW Instek GPP-2323 - Page 140

GPP Series User Manual
140
Function
Queries the delay parameter of the specified groups
of Delay. Returns to a string initiating from #. Data
head is to describe data length information starting
from #. For example, ##9000000017, the later 9
digits (000000017) following the initial 9 indicate
length of data flow (17 bytes).
The format of delay parameter of each group is
“serial number, output state, delay duration”, and
parameter of each group is divided by
semicolon“;”.
For example: “2, OFF, 3;3, ON,1;” representing the
delay parameters of 2 groups; the serial number of
delay parameter of the 1
st
group is 2, output state is
OFF,delay time is 3S;the 2
nd
group is 3, output state is
ON,delay time is 1S.
Description
<No> 0 – 2047 Sets the serial number of the delay
parameter. Integer 0 - 2047
Example
:DELAy2:PARAmeter? 2,2
Return the delay parameter of 2 groups of Delay
for CH2. From the second group.
Command
:DELAy[1|2]: RESTart
Function
Start output with the first setting
Example
:DELAy2: RESTart
Sets the CH2 output with the first delay setting
Command
:DELAy[1|2]:STARt <value>
Function
Sets the sequence number for initial execution.
<value>: Integer 0 - 2047
Example
:DELAy2:STARt 10
Sets the CH2 sequence output to start from the group 10.