OUTOFF|OUTON|>V|<V|=V|>C|<C|=C|>P|<
P|=P|AUTO
When OUTOFF, OUTON or AUTO is selected,
parameter <value> will be omitted.
Input trigger: disable output(OUTOFF) and enable
output (OUTON), both of which indicate to disable
or enable respectively the trigger when the
specified controlled channel output.
Voltage trigger: greater than voltage （ >V）, less
than voltage （ <V）, equal to voltage （ =V）, all
of which indicate that when the output voltage of
the specified controlled channel meets the set
trigger condition, it will trigger then.
Current trigger: greater than current （ >C）, less
than current （ <C）, equal to current （ =C）, all
of which indicate that when the output current of
the specified controlled channel meets the set
trigger condition, it will trigger then.
Power trigger: greater than power （ >P）, less
than power （ <P）, equal to power （ =P）, all of
which indicate that when the output power of the
specified controlled channel meets the set trigger
condition, it will trigger then.
Automatic trigger: triggers automatically only
when voltage, current or power triggers meet at
least one condition.
When either one of the following modes: voltage
trigger （ >V、<V、=V）, current trigger （>C、
<C
、=C）, power trigger >P、 <P
、=P） is selected, it required to set parameter <value> (the
specified voltage, current or power value of the
trigger condition).
To Next Page
Loading...
