GW Instek GPP-2323 - Page 170

GPP Series User Manual
170
Description
RISE|FALL|HIGH|LOW|STATE
It is available to trigger from the following options
of signal input: rising edge (RISE), falling edge
(FALL), high level (HIGH), low level (LOW)
or|STATE.For the signal input, high level:
2.5V~3.3V, low level: 0V~0.8V, noise tolerance:
0.4V.
Example
:TRIGger:IN:TYPE D0,RISE
Sets the trigger type from the trigger input of D0
data line as RISE.
Command
: TRIGger:IN:TYPE?{D0|D1|D2|D3|D4}
Function
Queries the trigger type from the trigger input of
the specified data line.
Example
:TRIGger:IN:TYPE? D0
Returns the trigger type from the trigger input of
D0 data line.
Command
:TRIGger:OUT:CONDition
{D0|D1|D2|D3|D4},{OUTOFF|OUTON|>V|<V|
=V|>C|<C|=C|>P|<P|=P|AUTO},<value>
Function
Sets the trigger condition from the trigger output of
the specified data line.