GW Instek GPP-2323 - Page 37

BASIC OPERATION
37
OCP
Set OCP. The range is as the
following:
CH1：0.05A - 3.50A
CH2：0.05A - 3.50A
CH3：0.05A - 1.20A (GPP-4323)
CH4：0.05A - 1.20A (GPP-4323)
Parameter
Setting (CH1
for example)
Voltage
Press the F1 key
corresponding to
Voltage to activatate
voltage setting area on
LCD (red font color
with the underline
indicator).
(a) Input digit with number pad (0-
9,.) and press unit key F1(V) or
F2(mV) to confirm:
Input 6.543V:
(b) Step input:
Press the left or right
arrow buttons to select
high and low level that
require fine-tune
(underline below the
corresponding number
value), and scroll the
scroll wheel to
increase or decrease
setting value.
Current
Press the F2 key
corresponding to