GW Instek GPP-2323 - Page 38

GPP Series User Manual
38
Current to activatate
current setting area on
LCD (red font color
with the underline
indicator).
(a) Input digit with number pad (0-
9,.) and press unit key F1(A) or
F2(mA) to confirm:
Input 1.543V:
(b) Step input:
Press the left or right
arrow buttons to select
high and low level that
require fine tune
(underline below the
corresponding number
value), and scroll the
scroll wheel to increase
or decrease setting
value.
OVP
Press F3 key to enter the
Protect menu.
Press F3 key to open
OVP function. OVP
display will change
from gray to white font.
Press the F1 key to enter
OVP setting area on
LCD, which will be thus