GW Instek GPP-2323 - Page 47

BASIC OPERATION
47
Note
The voltage (≥1V) or --.---
(<1V) pertaining to port
appears when Output is Off.
Parameter
Description
Load
Under PWR. mode, press F6 (Load
Mode) to enter the Load mode. LCD
will display the status .
Vset
Set rating range of voltage value
under Load mode of active channel:
CH1：1.50V-33.00V
CH2：1.50V-33.00V
Iset
Set rating range of current value
under Load mode of active channel
CH1：0.000A-3.200A
CH2：0.000A-3.200A
Rset
Set rating range of resistance value
under Load mode of active channel
CH1：1Ω-1000Ω
CH2：1Ω-1000Ω