GW Instek GPP-4323 User Manual

GPP Series User Manual
16
Operation
 Digital panel control.
 Output on/off control (ON/OFF), and each
channel can be controlled separately.
 Digital voltage and current settings. (Key &
Encode)
 10 groups of save/recall settings and 2 groups of
power-on settings.
10 groups of save/recall Sequence.
10 groups of save/recall Delay.
10 groups of save/recall Record.
 CH1/CH2 workable in Load Mode
 7 types display modes available with 5 contents
and 2 waveforms respectively
 Input/Output terminal (Control I/O)
 Alarm buzzer (BEEP).
 Key lock function (LOCK).
 Multiple remote control interfaces (standard:
RS232, USB; optional: GPIB, LAN)
Protection
Features
 Overvoltage and overcurrent protection (OVP/
OCP)
 Overtemperature protection (OTP).
 Polarity Reverse Protection
 Overload Protection (OPP in Load mode)
Interface
 Remote Control RS-232 (standard)
 USB remote control. (standard)
 Control I/O (standard)
 LAN remote control (optional)
 GPIB & LAN remote control (optional)

GW Instek GPP-4323 Specifications

General

Number of Outputs	4
Ripple and Noise (CC)	≤ 3 mArms
Output Voltage	0 to 32 V
Output Current	0 to 3 A
Ripple and Noise (CV)	≤ 1 mVrms
Load Regulation (CV)	≤0.01% + 3mV
Load Regulation (CC)	≤0.2% + 3mA
Line Regulation (CV)	≤ 0.01% + 2 mV
Line Regulation (CC)	≤0.2% + 3mA
Display	4.3 inch LCD
Interface	USB, RS232
Operating Temperature	0 to 40 °C
Storage Temperature	-10 to 70 °C