GW Instek GPP-4323 - Page 49

BASIC OPERATION
49
Input 52Ω:
(b) Step input: Press
the left or right arrow
buttons to select high
and low level that
require fine tune
(underline below the
corresponding
number value), and
scroll the scroll wheel
to increase or
decrease setting
value.
OVP
OCP
The setting method is identical to
Source.
Operation
ON/OFF
Press ON/OFF to output. Output is
open when output lights up; whilst
output is off when output lights out.
All
ON/OFF
Press All ON/OFF key to output all.
All channels output are open when
output lights up, and output light of
each channel will light up
simultaneously, whilst all channels
output are off when output lights out.
Mode
CV CC
CR
Font color appears
in orange under
Load mode.