Press the Advance key on control
panel. Select the F4 (Monitor)
function followed by pressing the F2
(Current) button to enter the current
setting.
1. Press the F1 (Set) button. The
setting on LCD is activated and
appears in red fond color. Use
number pad to set the parameters
directly; or use arrow keys along
with scroll wheel to complete the
setting.
2. Press the F4 (Define) button to
define terminated condition.
3. Press the F5 (Logic) button to
define logical pattern of other
conditions.
Press the Advance key on control
panel. Select the F4 (Monitor)
function followed by pressing the F3
(Power) button to enter the power
setting.
1. Press the F1 (Set) button. The
setting on LCD is activated and
appears in red fond color. Use
number pad to set the parameters
directly; or use arrow keys along
with scroll wheel to complete the
setting.
2. Press the F4 (Define) button to
define terminated condition.
To Next Page
Loading...
