LCR-1000 Series
10
Characteristics
Thank you for using LCR-1000 Series handheld LCR Meter as your
testing instrument. This Manual contains the detailed installation
steps. To ensure personnel safety and to protect your equipment
and data, please check if the following accessories are fully
supplied before starting the installation.
LCR-1000 Series is a handheld precision testing instrument with
automatic real-time detection controlled by a high-performance
microprocessor. The instrument uses true-color TFT-LCD, operates
with keyboard and touch screen, high-precision measurement and
easy-to-use.
The instrument can provide the highest test frequency of 100kHz
(LCR-1100), and provide 0.3/0.7/1.0Vrms signal level, automatic
measurement of inductance L, capacitance C, resistance value R,
complex impedance Z, quality factor Q, loss angle Tangent D,
phase and Rdc.
50,000 count display primary and secondary parameters are
displayed, and the basic accuracy is 0.2%, so that this instrument
can meet the requirements of various component manufacturers,
schools, research institutes and metrology quality inspection
departments for accurate testing.
The instrument provides the sorting function of the tolerance mode,
and provides a set of main parameter percentage sorting.
The whole series of instruments are equipped with USB-HID and
USB-VCOM interfaces as standard. The computer remote control
commands open to users are compatible with SCPI (Standard
Command for Programmable Instrument standard command set),
and users can write computer software independently to complete
remote control efficiently and data collection functions.
To Next Page
Loading...
