REMOTE CONTROL
49
REMOTE CONTROL
LCR-1000 has a USB Type-C interface, which
provides a virtual serial port (VCOM) or USB-
HID class to connect and control with a computer.
Connect to PC to ensure measurement accuracy
LCR-1000 needs to be connected to PC for command control
measurement. In order to ensure the measurement accuracy, the
instrument will not use an external power supply, but will only use
the internal battery for measurement.
Connect the PC to the USB port of the instrument, "USB Attached.
(Not Charging)" will be displayed at the bottom of the LCD screen
of the instrument, indicating that the battery is not charged, and the
PC will not supply power to the instrument. At this time, the
instrument is completely powered by batteries to ensure
measurement accuracy. Only the connection symbol and battery
symbol are displayed on the upper right of the LCD.
Before using the PC connection to control the measurement, please
fully charge the battery for convenience.
To Next Page
Loading...
