GW Instek LCR-1100 - Measurement Accuracy Guarantees; Test Cable Accuracy Effects

LCR-1000 Series
70
Accuracy
The following accuracy guarantees can only be provided by using a
five-wire terminal test socket or a connection test fixture for
measurement.
Measurements are made using 3-wire terminal sockets for quick
measurement reference only.
Test Cable
Use the five-wire terminal test socket to measure directly, and the
accuracy error is only shown in the table.
If the Kelvin Clip or Tweezers test fixture is connected for
measurement, the length accuracy error of the test line must be
added.
Accuracy: ±(A x B)(% of reading)
A: Basic accuracy specified in the table
B: Test Cable Accuracy
B = 1 + (L x F)
L: Test cable length factor, "L" is 0.05
F: Test frequency (kHz)