GW Instek LCR-1100 - Instrument Operating Parameters; Display, Function, and Counts Specifications; Accuracy and Interface Specifications

SPECIFICATIONS
69
Instrument operating power: 1.5W
Battery continuous working time: 7 hours(100% backlight), 9 hours(50%
backlight)
Battery charging power: 5VDC, 2A, 10W(maximum)
Battery charging time: within about 3 hours
USB charger output: 5VDC, 2A(minimum)
PC USB port output: 5VDC, 2A(minimum)
General
Dimensions: 90 mm (W) X 195 mm (H) X 41 mm (D)
Weight: Approximately 380g (battery included)
Safety and EMC
EN55011,EN61326,EN61000
Display
2.8" LCD color display with touch screen
Backlight
50%、100%
Dim display
brightness
5 minutes/10 minutes/20 minutes/30 minutes/off
*Only works on battery power
Auto power off
5 minutes/10 minutes/20 minutes/30 minutes/off
*Only works on battery power
Function
C-D, C-Q, C-R, L-D, L-Q, L-R, L-Rdc, R-Q, R-X, R-Rdc,
Rdc, Z-D, Z-Q, Z-θr, Z-θd
Counts
5000 counts
Basic accuracy
0.2%
Equivalent
Series、Parallel
Range
Auto range、 Hold range
Speed
Slow 2.5 times/sec、Fast 10 times/sec
Level
0.3V, 0.7V and 1.0Vrms, Accuracy: 10%
Frequency
LCR-1010: 50Hz, 100Hz, 120Hz, 1kHz, 2kHz, 10kHz
LCR-1100: 50Hz, 100Hz, 120Hz, 1kHz, 2kHz, 10kHz,
50kHz , 100kHz
Accuracy: 0.02%
Output
Impedance(RO)
100Ω, Accuracy: 5%
Correction
Open、Short
Comparator
Main parameter(%), support sound(Pass/Fail)
Test terminal
5-terminal and 3-terminal
Interface
USB(Type C) Device class(HID),Virtual serial
port(VCOM)