LCR-1000 Series
28
AUTO LCZ
AUTO LCZ function can automatically help to select the best
parameters and the best equivalent circuit method.
If the range is set to auto, the LCR will be in a fully automatic test
state.
After AUTO-LCZ is turned on, the FUNC item will display
[AUTO-LCZ] and the EQU item will display [AUTO].
Note: After the automatic parameter is turned on, the user resets
[FUNC] or [EQU], and the automatic parameter function will be
turned off.
COMP
The built-in simple comparator function of the instrument can
compare the main parameters and display the relative deviation
percentage on the measurement display page.
The formula for the comparator is as follows:
Rx: current measured value
Nom: Nominal value entered
To Next Page
Loading...
