GW Instek LCR-1100 - System Settings and Configuration; Configuration, Interface, and Comparator

LCR-1000 Series
18
System Settings
1. Data hold function.
2. Measurement parameter settings are
automatically saved
3. Touch screen settings
4. Power saving mode settings (Automatic
power off, APO; Screen dimming time
setting, DIM DISPLAY; Screen brightness
adjustment, BRIGHTNESS)
Interface
The instrument supports USB communication interface, which can
be set as HID and virtual serial port (VCOM) two interfaces.
USB-HID remote
control
Support USB high-speed mode 48MHz, ASCII
transmission.
USB-VCOM
remote control
Virtual serial port communication, baud rate
adaptive, maximum baud rate 115200, ASCII
transmission.
Comparator function
The instrument can perform percentage sorting
of a group of main parameters, and the
secondary parameters do not participate in the
sorting.