After pressing the [KEYPAD INPUT] key, the
keyboard input box will be displayed.
Use your finger to lightly touch the number keys on
the touch screen to enter the nominal value or use the
direction keys to select a number and then press the
key to enter the nominal value.
Finally, press the unit function key to complete the
input.
Note: If the touch screen is turned off in the system,
when the input box is activated, the touch screen is
automatically enabled for touch screen input.
After pressing the [MEAS INPUT] key, the LCD
display prompt::
Plug a Standard Component...
After inserting the standard component, press the
[OK] key to start measuring the standard component,
and the measured value is displayed in the nominal
value item.
To Next Page
Loading...
