GW Instek LCR-6100 - FILE Subsystem; File; File:save; File:load

LCR-6000 Series User Manual
123
11.16 FILE Subsystem
The FILE subsystem command group executes the file operation.
Figure 11-13 FILE Subsystem Command Tree
11.16.1 FILE?
The FILE? query returns the file number used by the system.
Query Syntax
FILE?
Query Response
<NR1(0 TO 9): File number>
Example
SEND> FILE?<NL>
RET> 0<NL>
11.16.2 FILE:SAVE
The FILE:SAVE command saves all user settings into the currently used file.
Command
Syntax
FILE:SAVE
Example
SEND> FILE:SAVE<NL>
The FILE:SAVE <n> command saves all user settings into the specified file.
Command
Syntax
FILE:SAVE <File No.>
Parameter
Where, <File No.> is:
NR1 (0 to 9)
Example
SEND> FILE:SAVE 0<NL>
11.16.3 FILE:LOAD
The FILE:LOAD command recalls all user settings from the currently used
file.
Command
Syntax
FILE:LOAD
Example
SEND> FILE:LOAD<NL>
FILE
:SAVE
:LOAD
<File No.>
<File No.>
:DELete
<File No.>