GW Instek LCR-6100 - Setting the System Date and Time; Figure 6-1 [SYSTEM CONFIG] Page

System Configurations
70
Figure 6-1 [SYSTEM CONFIG] Page
6.1.1 Setting the system date and time
LCR-6000 Series features a built-in 24-hour clock.
To change the date
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select date field.
Step 4. Use the soft-keys to edit date.
Soft-key
Function
YEAR INCR+
Increases the year in steps of 1.
YEAR DECR-
Decreases the year in steps of 1.
MONTH INCR+
Increases the month in steps of 1.
DAY INCR+
Increases the day in steps of 1.
DAY DECR-
Decreases the day in steps of 1.
To change the time
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select time field .
Step 4. Use the soft-keys to edit time.