GW Instek LCR-6100 - Measure Key (Continued); [LIST MEAS] Page

Measure Key
28
Table 4-5 Effective measurement range for the impedance range
when in HOLD state.
Range
No.
Impedance
range
Effective measurement range
8
10Ω
0 - 10Ω
7
30Ω
10Ω-100Ω
6
100Ω
100Ω-316Ω
5
300Ω
316Ω-1kΩ
4
1kΩ
1kΩ-3.16kΩ
3
3kΩ
3.16kΩ-10kΩ
2
10kΩ
10kΩ-31.6kΩ
1
30kΩ
31.6kΩ-100kΩ ()
0
100kΩ
100kΩ- (This range is available only
when the test frequency < 20kHz.)
Table 4-6 DCR FUNC effective measurement range for the
impedance range when in HOLD state.
When the measured value exceeds 150% of the full
scale for the selected range, “OVERLOAD” will be
displayed.
Range
No.
Impedance
range
Effective measurement
range
Overload
8
1Ω
0Ω– 3.1Ω
4.65Ω
7
10Ω
2.8Ω– 99Ω
148.5Ω
6
100Ω
90Ω– 312Ω
468Ω
5
300Ω
280Ω– 990Ω
1.485kΩ
4
1kΩ
900Ω– 3.1kΩ
4.65kΩ
3
3kΩ
2.8kΩ– 9.9kΩ
14.85kΩ
2
10kΩ
9kΩ– 31kΩ
46.5kΩ
1
30kΩ
28kΩ– 99kΩ
148.5kΩ
0
100kΩ
90kΩ– 312kΩ
100MΩ
DCR accuracy: ±0.05% with effective measurement.
range