GW Instek PSU 6-200 - UART Remote Interface; Configure UART

PSU Series User Manual
164
12
13
15
14
16
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
UART Remote Interface
Configure UART
Overview
The PSU uses the IN & OUT ports for UART
communication coupled with RS232 (GW Part
number PSU-232) or RS485 adapters (GW part
number PSU-485)
The pin outs for the adapters are shown below.
PSU-232 RS232
cable with DB9
connector
DB-9 Connector
Remote IN Port
Remarks
Pin No.
Name
Pin No.
Name
Housing
Shield
Housing
Shield
2
RX
7
TX
Twisted
pair
3
TX
8
RX
5
SG
1
SG