H3C MSR 810 User Manual

133
HDLC commands
This feature is supported only on Layer 2 Ethernet ports on the following modules:
• CE3.
• CPOS.
• CT3.
• E1.
• E1-F.
• POS.
• SAE.
• T1.
• T1-F.
Commands and descriptions for centralized devices apply to the following routers:
• MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
• MSR2600-10-X1.
• MSR 2630.
• MSR3600-28/3600-51.
• MSR3600-28-SI/3600-51-SI.
• MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
• MSR 3610/3620/3620-DP/3640/3660.
Commands and descriptions for distributed devices apply to the following routers:
• MSR5620.
• MSR 5660.
• MSR 5680.
IPv6-related parameters are not supported on the following routers:
• MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
• MSR3600-28-SI/3600-51-SI.
link-protocol hdlc
Use link-protocol hdlc to enable HDLC encapsulation on an interface.
Syntax
link-protocol hdlc
Default
PPP encapsulation is enabled on an interface.
Views
POS interface view
Serial interface view

H3C MSR 810 Specifications

General

Brand	H3C
Model	MSR 810
Category	Network Router
Language	English