H3C MSR 810 User Manual

234
Syntax
modem callback
undo modem callback
Default
Callback is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The callback function enables a modem to disconnect an incoming call and call back the calling party
upon request.
Examples
# Enable the callback function.
<Sysname> system-view
[Sysname] modem callback
modem caller-number resolve
Use modem caller-number resolve to enable the modem to obtain the call numbers of calling
terminals.
Use undo modem caller-number resolve to disable the modem from obtaining the call number of
calling terminals.
Syntax
modem caller-number resolve [ ata-waiting-time time ]
undo modem caller-number resolve
Default
The modem does not obtain caller numbers when it accepts calls from terminals.
Views
User line view
Predefined user roles
network-admin
Parameters
ata-waiting-time time: Specifies the maximum amount of time that the modem waits for a calling
terminal to send the call number. The value range for the time argument is 10 t o 10000, in
milliseconds. The default value is 1000. When this timer expires, the modem does not receive the
call number of the terminal. Increase the timer value on a s low link for the router to obtain caller
numbers successfully.
Usage guidelines
CAUTION:
Executing this command disconnects the modem connecti
on that has been established on the user
line.

H3C MSR 810 Specifications

General

Brand	H3C
Model	MSR 810
Category	Network Router
Language	English