H3C MSR 810 User Manual

251
Field
Description
PIN Verification
PIN authentication status:
• Disabled.
• Enabled.
• Unknown.
PIN Status
PIN status:
• Ready—The SIM card is ready.
• PIN Requirement—Requires you to execute the pin verify command to
enter the PIN for PIN verification.
• PUK Requirement—Requires you to execute the pin unlock command
to unlock the SIM or UIM card.
SIM Status
SIM card status:
• OK—The SIM card is normal.
• Network Reject—The SIM card is denied access to the network. The
cellular interface is not available.
• Not Insert—The SIM card is absent. The cellular interface is not
available.
• Not Initialized—The SIM card status cannot be identified.
ICCID ID of the SIM card, displayed only when the SIM card status is
OK
.
Related commands
mode
pin modify
pin unlock
pin verification enable
pin verify
plmn select
profile create
display controller cellular
Use display controller cellular to display information about a cellular interface.
Syntax
display controller [ cellular [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a cellular interface by its number.
Usage guidelines
If you do not specify the cellular keyword, the command displays information about all interfaces of
the device.

H3C MSR 810 Specifications

General

Brand	H3C
Model	MSR 810
Category	Network Router
Language	English