H3C MSR 810 User Manual

315
Examples
# (Distributed devices in standalone mode.) Specify a primary traffic processing slot and a backup
traffic processing slot for Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] service slot 2
[Sysname- Dialer1] service standby slot 3
Related commands
service
shutdown
Use shutdown to shut down a dialer interface.
Use undo shutdown to bring up a dialer interface.
Syntax
shutdown
undo shutdown
Default
A dialer interface is up.
Views
Dialer interface view
Predefined user roles
network-admin
Examples
# Shut down Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] shutdown
standby routing-group
Use standby routing-group to assign a dialup interface to a dynamic route backup group.
Use undo standby routing-group to remove a dialup interface from a dynamic route backup group.
Syntax
standby routing-group group-number
undo standby routing-group group-number
Default
A dialup interface is not assigned to any dynamic route backup group.
Views
Dialup interface view
Predefined user roles
network-admin

H3C MSR 810 Specifications

General

Brand	H3C
Model	MSR 810
Category	Network Router
Language	English