To Next Page

To Previous Page

4-6

Mac Address : 000fe20f3100

Press Ctrl-B to enter Boot Menu... 2

The last line prompts you to enter the Boot Menu and waits two seconds for your response.

z The system has two startup modes: normal and fast. The normal startup mode spends a little more

time than the fast startup mode because the former takes more self-test operations.

z By default, the system starts up in fast mode and the waiting time here is two seconds. While, if you

set the startup mode to normal, this waiting time is five seconds. For the setting of the startup mode,

refer to the next section.

z If you press <Ctrl+B> within 2 seconds, the Boot Menu is displayed:

BOOT MENU

1. Download application file to flash

2. Select application file to boot

3. Display all files in flash

4. Delete file from flash

5. Modify bootrom password

6. Enter bootrom upgrade menu

7. Skip current configuration file

8. Set bootrom password recovery

9. Set switch startup mode

0. Reboot

Enter your choice(0-9):

z If you perform no operation or press a key other than <Ctrl+B> within two seconds, once the

waiting time becomes zero, the system begins to automatically start up and the following

information is displayed:

Auto-booting...

Decompress Image...................................................

...................................................................

...............................................OK!

Starting at 0x80100000...

User interface aux0 is available.

Press ENTER to get started.

Changing the Startup Mode

By default, the system starts up in fast mode. If you want to change the startup mode to normal, press

<Ctrl+B> within two seconds to enter the Boot Menu showed below:

H3C S3100 Series Installation Manual

Other manuals for H3C S3100 Series