13
Installing the switch
CAUTION:
Keep the tamper-proof seal on a mountin
screw on the chassis cover intact, and if you want to open the
chassis, contact the local agent of H3C for permission. Otherwise, H3C shall not be liable for any
consequence caused thereby.
Installation flow of the switch
Figure 16 Hardware installation flow of the switch
Ground the switch
Install the switch
to a specific
position
Start
Connect the power cord
Verify the installation
Power on the switch
Operating properly? Power off the switch
Troubleshoot
the switch
No
Yes
End
Installing the switch
Selecting an installation method
The S3100V2 Switch Series supports multiple installation methods. You can select one as needed.
To Next Page
Loading...
Need help?
General