1-1
1 ACL Configuration
This chapter includes these sections:
z ACL Overview
z ACL Configuration Task List
z Configuring an ACL
z Creating a Time Range
z Configuring a Basic ACL
z Configuring an Advanced ACL
z Configuring an Ethernet Frame Header ACL
z Copying an ACL
z Displaying and Maintaining ACLs
z ACL Configuration Examples
z Unless otherwise stated, ACLs refer to both IPv4 and IPv6 ACLs throughout this document.
z The S7500E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7500E series can be connected together to form a distributed IRF device.
If an S7500E series is not in any IRF, it operates as a distributed device; if the S7500E series is in
an IRF, it operates as a distributed IRF device. For introduction of IRF, see IRF Configuration
Guide.
ACL Overview
This section covers these topics:
z Introduction to ACL
z Application of ACLs on the Switch
z ACL Classification
z ACL Numbering and Naming
z Match Order
z Implementing Time-Based ACL Rules
z IPv4 Fragments Filtering with ACLs
Introduction to ACL
As network scale and network traffic are increasingly growing, network security and bandwidth
allocation become more and more critical to network management. Packet filtering can be used to
To Next Page
Loading...
Need help?
General
