EasyManuals Logo

H3C S7500E Series Configuration Guide

H3C S7500E Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
3-10
To do… Use the command… Remarks
Enter control plane view (on a
distributed IRF device)
control-plane chassis
chassis-number
slot
slot-number
Required
Apply the QoS policy to the
control plane
qos apply policy
policy-name {
inbound
|
outbound
}
Required
z The QoS policy applied to the control plane for a specific slot takes effect only on the slot.
z In case a global QoS policy conflicts with a control plane QoS policy, the control plane QoS policy
takes effect on the control plane.
z By default, devices are configured with pre-defined control plane policies, which take effect on the
control planes by default. A pre-defined control plane QoS policy uses the system-index to identify
the type of packets sent to the control plane. You can reference system-indexes in if-match
commands in class view for traffic classification and then re-configure traffic behaviors for these
classes as required. You can use the display qos policy control-plane pre-defined command
to display them.
z In a QoS policy for control planes, if a system index classifier is configured, the associated traffic
behavior can contain only the CAR or accounting action. In addition, if the CAR action is
configured, only its CIR setting can be applied.
Displaying and Maintaining QoS Policies
To do… Use the command… Remarks
Display traffic class information
display traffic classifier
user-defined
[ tcl-name ]
Available in any view
Display traffic behavior
configuration information
display traffic behavior
user-defined
[ behavior-name ]
Available in any view
Display user-defined QoS policy
configuration information
display qos policy
user-defined
[ policy-name [
classifier
tcl-name ] ]
Available in any view
Display QoS policy configuration
on the specified or all interfaces
display qos policy interface
[ interface-type interface-number ]
[
inbound
|
outbound
]
Available in any view
Display VLAN QoS policy
configuration on a distributed
device
display qos vlan-policy
{
name
policy-name |
vlan
vlan-id } [
slot
slot-number ] [
inbound
|
outbound
]
Available in any view

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals