H3C UniServer R4900 G3 Operating System Installation Guide

11
Figure 247 Installing Mellanox network adapter driver
b. If the issue persists, contact H3C Support.
•
Method 2:
c. Access BIOS Setup > Advanced > Socket Configuration > Processor Configuration,
set Hyper-Threading[All] to Disabled, install the network adapter driver provided by
Mellanox, and then enable hyper threading.
Figure 248 Setting hyper threading
b. If the issue persists, contact H3C Support.

H3C UniServer R4900 G3 Specifications

General

Brand	H3C
Model	UniServer R4900 G3
Category	Server
Language	English