H3C WX3500H Series Installation Guide

29
reboot failure, use the boot-loader file command to specify a new startup software image.
For more information about the display startup and display boot-loader commands, see
software upgrade commands in H3C WX3500H Access Controller Fundamentals
Command Reference.
• The device will not reboot if a file is being accessed.
Configuration procedure
Rebooting the device immediately
Task Command Remarks
Reboot the device immediately.
reboot
[
force
] Available in user view.
Scheduling a reboot for the device
Task Command Remarks
Schedule a reboot.
• Schedule a reboot to occur at a
specific time or date:
schedule reboot at time [ date ]
• Schedule a reboot to occur after a
delay:
schedule reboot delay time
Use either command.
By default, no reboot date or time or reboot
delay time is specified.
Available in user view.
The most recent configuration takes effect
if you execute the
scheduler reboot a
t or
scheduler reboot delay
command
multiple times.

H3C WX3500H Series Specifications

General

Brand	H3C
Model	WX3500H Series
Category	IP Access Controllers
Language	English