Step 3: Install the stir bar and tubing harness
Do the illustrated steps that follow.
Step 4: Install the reagent bottles
C A U T I O N
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the personal protective
equipment appropriate to the chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
Items to collect:
• Personal protective equipment (refer to MSDS/SDS)
• Indicator bottle
• Buffer bottle
• DPD compound bottle
1. Put on the personal protective equipment identified in the safety data sheets (MSDS/SDS).
2. Install the buffer bottle on the right side and the indicator bottle on the left side. Refer to the
illustrated steps that follow.
Note: (Optional) Use the top of the analyzer as a shelf.
English
13
To Next Page
Loading...
