Page 36
Tips and Techniques for Programming the Instrument
8837prg.fm
Section 5
Figure 11 Sigma 900 All Weather Refrigerated Sampler Keypad and Display
5.2 Tips and Techniques for Programming the Instrument
• The instrument beeps each time a key is pressed.
• After the
ON key is pressed, the display will show one of the following
messages:
READY TO START, PROGRAM COMPLETE, PROGRAM HALTED,
PROGRAM RUNNING
, or RE-ENTER PROGRAM, DEPRESS *.
• When programming the instrument, pressing the * key causes the display
to back up to the previous field.
• When the
START PROGRAM key is pressed, all recorded sample times
and dates are erased from memory.
5.3 Selecting a Different Language
To operate the instrument in a language other than English:
1. Put the unit in standby. Press and hold the
STOP PUMP key for three
seconds.
English? will appear on the screen.
2. Choose
No. The display will list each available language one-at-a-time.
Choose
Yes to select a displayed language.
To Next Page
Loading...
