Hach SIGMA 900 - Appendix B Quick Reference Guide - Programming Flow Charts (Part 1); Programming Flow Chart

Page 66
Quick Reference Guide
8837apdx_qrg.fm
Appendix B
Program Flow Chart
Ready to Start Program Halted Program Complete
Parameter Entry Press \
Alter Parameters?
Yes
NO
Review Parameters
Return to Standby
Advanced Program? (YES to Enable, NO to Disable)
Enter number of sample bottles (1 or 24 with standard program, 1, 2, 4, 8, or 24 with Adv Prog.)
Enter units for bottle volume (ML or Gal)
Enter bottle volume (in specified units)
Enter units for tubing length (FT or CM)
Enter length of intake tubing (in whole FT or CM)
Program Lock (enable or disable)
Enter Cabinet Temperature
If previously entered parameters are desired for another (new) program, it is not
necessary to re-enter the parameters. Simply press the NEW PROGRAM key and start
here:
Program Delay?
YES
Set Hour, Minute, AM/PM, Month/Day/Year
Timed Mode?
NO
Program Stop?
Program Restart?
Program Stop?
Set Hour, Minute, AM/PM, Month/Day/Year
Set Hour, Minute, AM/PM, Month/Day/
Year
NO
NO
Set Hour, Minute, AM/PM, Month/Day/
Year
Flow Mode?
NO
NO
YES
YES
Set Flow Interval
Between
Samples
Other Changes?
YES
Composite Mode?
NO
Discrete Mode?
YES
NO
Set-up Complete - Ready To Start
Continuous Mode?
NO
YES
Set # of Samples
Samples /
Bottle?
Bottles /
Sample?
Timed Bottle?
NO NO
YES
Real Time?
Bottles/Intvl = _____
NO
YES
Set Hour:Min:AM/PM
Set
Interval
Continuous Mode?
Change Volume?
YES
Set#of
Samples
Set#of
Bottles
NOYES
AB
Press
NEW PROGRAM
key
ADVANCED
PROGRAM
Note: Boxes with dark border denote ADVANCED PROGRAM feature.
Variable Interval Variable Interval
Timed Overide
Set Interval
Between Samples
YES
NO
Set Next Flow
Interval
Between
Samples
NO
Set Next Interval
Between
Samples
YES
YES
YES
NO
Con't on next page