Hach SIGMA 900 - Section 6 Programming Worksheets - Main Program; Main Sampler Program Worksheet

Page 55
8837prgwrk.fm Programming Worksheets
Section 6 Programming Worksheets
6.1 Main Sampler Program
Press the * key to begin or modify a program.
Name: Date: SN: ID#:
DTU Revision: 900 Revision:
1. Alter Parameters? Press YES to begin.
2. Enable Advanced Program Features? Advanced Program?
Press
YES to enable the advanced program features.
Advanced Program Features are:
• Multiple Start/Stop times
• Two-, four-, or eight-bottle sets
• Multiple sample intervals
• Timed bottle
3. Enter Number of Sample Bottles: Total Bottles = __________
4. Enter Units for Bottle Volume: Milliliters or gallons?
5. Volume = __________
6. Enter Units for Tubing Length: Feet or centimeters?
7. Enter Length of Intake Tubing: Length = _________
8. Program Lock?
YES or NO?
9. Cabinet Temperature: _____ °C
10. Program Delay?
YES or NO?
If Yes then:
Set, Hr:Min, AM or PM, Day/Month/Year
___:____ _______ ___ /_______/_____
11. Timed Mode?
YES or NO?
If Yes then:
INTV = __________ MIN
12. Flow Mode?
YES or NO?
If Yes then:
INTV = __________ Counts
13. Composite Mode, Continuous Mode?
YES or NO?
Message will appear if number of sample bottles is one.