Hach SIGMA 900 - Section 6 Programming Worksheets - Main Program (Cont.); Main Sampler Program Worksheet

Page 56
Main Sampler Program
8837prgwrk.fm
Section 6
Name: Date: SN: ID#:
14. Discrete Mode: Samples / Bottle or Bottles / Sample?
Press
YES to select mode.
Samp/Bottle = __________
or
Bottle/Sample = _________
15. Change Volume?
YES or NO?
If
NO then all prior settings will be kept, go to Step 15.
If
YES then:
a. Sample Vol = _________
b. Calibrate Vol?
YES or NO?
If
NO then go to Step 15.
If
YES then see Volume Calibration Sheet.
16. Intake Rinses?
YES or NO?
If
YES then:
Rinse Cycles = _____
17. Intake Faults?
YES or NO?
If
YES then:
Intake Faults = _____
18. Enter I.D. #: __________
19. The setup is complete; ready to start. If the Stormwater programming is complete, press
START PROGRAM to
begin. Otherwise see the Stormwater Setup Sheet.