Need help?Do you have a question about the hager tebis TX100 and is the answer not in the manual?
General| Brand | hager |
|---|---|
| Model | tebis TX100 |
| Category | Remote Control |
| Language | English |
Procedure for powering on and initial startup of the TX100 configurator.
Options for creating a new project or selecting an existing one upon TX100 startup.
Instructions for saving the current project to external memory, including options like 'Save as'.
Steps to create a project and assign the media coupler to the TX100 for TP/mixed installs.
Process for learning installation products and automatically numbering outputs.
Manual numbering process for inputs in TP and bidirectional RF installations.
Procedure for numbering inputs of unidirectional RF products.
Learning installation with manual numbering for outputs and inputs.
Process for assigning functions to inputs after product learning and numbering.
Assigning functions to inputs in TP or bidirectional RF installations.
Assigning functions to inputs of unidirectional input products.
Creating links between inputs and outputs and setting additional parameters.
Procedure for creating a basic link between one input and one output.
Method for linking one input to multiple outputs simultaneously.
Copying links from one input to another for efficient configuration.
Configuring parameters like timer duration when confirming a link.
Setting parameters related to specific products or applications, like shutter duration.
Procedure for removing simple or multiple links from the installation.
Function to remove all programmed links from the entire installation.
Process to change the function of an input after removing its links.
Procedure for removing an input from the installation and reassigning its number.
Resetting a product and removing it from the project list.
Prerequisites and capabilities of the Expert mode for advanced configurations.
Overview and access methods for the Expert mode configuration.
Selecting inputs, outputs, and objects for configuration in Expert mode.
Viewing and editing group addresses for communication objects in Expert mode.
Performing extended configurations using the TX100's Expert mode.
To Next Page
