hager TJA670 domovea Basic - Connection Using the KNX; IP Bridge; The Remote Connection Can Only be Made with the TJA470 Domovea Expert Server.connection with a Local Network

14
TJA670 domovea Basic
TJA470 domovea Expert
2.8 Connection using the KNX / IP bridge
The domovea server is used to connect via IP to the KNX bus for product configuration by ETS. It uses the KNXnet /
IP standard and establishes communication between KNX lines and data networks using the Internet Protocol (IP).
Access to use the server as an IP bridge can be done locally or remotely.
2.8.1 The remote connection can only be made with the TJA470 Domovea Expert server.Connection with a local
network
With ETS, the domovea server appears as a communication interface with the KNX bus.