5.2.1.4 Time management
Click on Time management to view:
• the time zone that can be selected from the drop-down list, for displaying the date and time at the client level.
• the Latitude and Longitude of the time zone, to set the time of sunrise and sunset
• the Synchronisation with an Internet server (click Yes or No depending on requirements). By default, the
configuration server is synchronised with the online Time server (NTP network):
• the periodical dispatch of the KNX frame allowing the date and time to be broadcast on the network
(deactivated by default)
• click on Save to confirm your choices.
5.2.1.5 domovea
Click on domovea to view:
• the KNX address format: Enables selection of the address format of KNX groups (1 Level - 2 Levels - 3
Levels).
• the Currency symbol : Enables the currency to be defined
• click on Save to confirm your choices.
5.2.1.6 Easytool
Click on Easytool to set the following options:
• click on the Enable configuration facilitation of input channels (Rocker function): Depending on the
function type selected, the system will default to the additional function on the second input.
• click on the Activate automatic discovery field: the installation can be automatically scanned to discover a
new product.
• click on the Activation period field: defines the duration between 2 automatic scans (default value: 10 min.)
• click on the Activate Auto links field: allows you to view the automatic links of the installation for products
with this function.
• click on Save to confirm your choices.
5.2.2 Users
This manages the different administrator and user accounts. There are two types of operation:
• The transfer of administrators’ rights
• The creation and management of additional accounts
5.2.2.1 The transfer of administrators’ rights
Once the installer has finished configuration, he must send the administrators’ rights to the owner.
• click on , a drop-down menu appears,
• click on Users.
A window opens, inviting you to transfer the rights:
• enter the email and password of the myHager account,
• enter the country where the system is installed,
• follow the instructions on the screen to finalise the transfer.
Note: Following the transfer of rights, the Admin account is no longer valid.
To Next Page
Loading...
