hager TJA670 domovea Basic - The Domovea Solution; Introduction to the Domovea TJA670-TJA470 Server; The Configuration Server

6
TJA670 domovea Basic
TJA470 domovea Expert
2.3 The domovea solution
The domovea server has 2 solutions:
- domovea basic, offering basic features
- domovea expert, offering more advanced features
Below is a summary table:
Function
TJA670 (domovea basic)
TJA470 (domovea expert)
Integrated KNX Easytool
Yes
Yes
Number max. of KNX and IoT appliances
500
500
Number max. of IP cameras
5
50
Google, Alexa, IFTTT services
Yes
Yes
Number of user sequences (client)
50
50
Number of advanced sequences (configurator)
No
100
User rights management
Yes
Yes
User personalisation
Yes
Yes
Installer and client remote access
Yes
Yes
KNX / IP bridge
Local access only
Local and remote access
Regulation – Number of Thermostat
No
10
Doorphone integration
No
Yes
 The KNX / IP bridge allows parameterization of the KNX installation with ETS software over an IP connection.
2.4 Introduction to the domovea TJA670-TJA470 server
2.4.1 The configuration server
The server is a piece of equipment that creates a link between an IP environment and the KNX bus systems. It
involves the use of two applications, the first being the Hager configuration application, Pilot, and the second being the
domovea application for the end user.
The product is connected:
- on the one hand by a KNX bus via a
connector ;
- on the other hand by a local IP network via
one of the two Ethernet ports .
OS compatibility:
For Hager Pilot and domovea, the version must
be no earlier than: iOS 11 or Android 6