TJA670 domovea Basic
TJA470 domovea Expert
5.2.1.2 Interface
Click on Interface to view:
• the Device name, which you can change, if necessary,
• the KNX address of the configuration server, which you can change if necessary,
• the KNX Certificate of the configuration server, enabling installation in KNX Secure,
• the KNX Serial Number of the configuration serverthe MAC address of the configuration server,
• the IP detection: automatic or manual (depending on requirements),
• the DNS server: automatic or manual (according to requirements),
• click on Save to confirm your choices.
Click on Reset KNX/IP Interface to reset the KNX connection settings.
If the KNX IP Secure process has been completed before the reset, simply reload the participant at ETS
level to recover the service.
5.2.1.3 Remote access
Remote access enables connection to the configuration server and the client from a device connected to the Internet.
Click Remote access to view:
• the Remote address field: the http address link of the configuration server,
• Use of remote access (default value: activated): enables the installer to intervene remotely,
• click on Save to confirm your choices.
You can connect remotely using:
• hager Pilot or domovea client.
o select server TJA670-XXXXX or TJA470-XXXXX.
If the server does not appear on the list,
o click Add a server,
o add the server by entering either:
▪ The IP address
▪ The name of the server (TJAxxx-xxxxxx)
▪ The serial number
To add a remote server (not connected to the local network), you must enter the serial number of the
device. This is visible in the Remote Access menu where the serial number is contained in the address (For
example: https://kj4f6s8kvcywvd.domovea.com, the serial number will be kj4f6s8kvcywvd).
• a device connected to the Internet
o launch the WEB browser,
o in the address box, enter the pathway for remote access (for example:
https://kj4f6s8kvcywvd.domovea.com),
o the WEB browser launches at the login page. Enter the User name and Password.
For more information, please see tutorial 5 – Enable remote access with easytool and with domovea
at www.hager.com/domovea.
To Next Page
Loading...
