TJA670 domovea Basic
TJA470 domovea Expert
6.2 Installation
6.2.1 Devices
A device is a piece of equipment connected to a part of a KNX installation that can be controlled or viewed via the
client domovea, such as lighting, shutters, heating, etc. (maximum 500 devices per installation)
For products not recognised by the easytool configuration tool, domovea can only collect data from the
installation products. It must verify that the KNX products that you wish to add to domovea offer tool formats
compatible with the tools of the domovea devices
Click on New device to create a device:
• in the left column, select the device type (KNX – Camera- IoT),
• in the right column, select the device according to the type selected.
The device is created.
• configure the properties of the device if necessary,
• add the different group addresses for the KNX devices.
For more information, please see tutorial 9- Add and configure a KNX device not discovered by
easytool at www.hager.com/domovea.
The domovea server has a presence simulation function. It allows you to control the devices (lighting and shutters
only) in a random way giving the impression of being at home during your absence.
Each device can be included or excluded from the presence simulation.
• Click on to add the device to the presence simulation,
• Click on to remove the device from the presence simulation,
For more information, please see tutorial 13- Use the presence simulation function with domovea at
www.hager.com/domovea.
6.2.2 Groups
A group is a part of the installation composed of a room, a building floor, an area or part of a set of rooms, floors or
areas (e.g. kitchen, living room, exterior).
The groups comprise the structure of the project (maximum 100 groups per installation)
Click on New group to start creating your project’s links.
• rename the group directly in the field on the top right.
You can add a description if necessary.
Repeat the operation for each group
Once the groups are created, the devices must be assigned to each corresponding group.
• click on All devices,
• select one or more devices from the list,
• click on Change the Group at the top of the device list,
• select the group to which you wish to assign the selected device(s).
For more information, please see tutorial 10 - Create groups in domovea using Hager Pilot at
www.hager.com/domovea.
To Next Page
Loading...
