6.3.2 Home status
Home Status is a general state of the house. It is possible to activate or deactivate sequences according to this status.
Four home status are set by default and can be changed at will (Home - Absence - Night - Holiday). It is also possible
to add up to four additional home statuses. The maximum number allowed is 8.
Click on new in the Home status section to create an additional home status for the project.
• rename the home status directly in the field on the top right.
• choose an icon for your home status.
You can add a description if necessary.
• click Add a trigger.
• configure the properties
• click OK to save your preferences.
• click on Add in the section Sequences executed at the activation of the home status.
• select the desired sequence
• add other sequences if necessary.
To Next Page
Loading...
