14/64 CMp | Ordering code
Bosch Rexroth AB, RE 15409 Version 08.2022,
The S-Link system can consist of a number of sensor modules, one for each
component in the additional sensor package. There will be separate order codes
for the sensor element, the adaptor for mechanical connection and the connecting
cable.
The used attributes for each part are:
• Sensor – Attribute 02
• Adapter Coupling – Attribute 03
• Cable – Attribute 04
4.4.1 Sensor
Attribute 02 is the type of sensor. Each sensor type is described in detail under
technical data.
4.4.2 Adapter Coupling
Attribute 03 is the mechanical connection between the sensor and the hydraulic
system. The different coupling types are described under technical data.
4.4.3 Cable
Attribute 04 is the total length of all connection cables between sensors and the
box. The cable will always be of 5 wire type where the non-used wires are cut.
Connection to the sensors are described for each sensor type under technical data.
To Next Page
Loading...