62/64 CMp | Commissioning
Bosch Rexroth AB, RE 15409 Version 08.2022,
Press to access
Go down one step to the menu entry “Status”
Press to access
Press to access menu entry “Progress“
Check samples per second from Spider.
If this is >0 data is being acquired
Check log files in the transmit que.
If this is <2 everything is ok.
Go back five times to come to the main display
⊠
>
⊠
Status
⊠
Progress
Samples : 85,70 / s
Mem used : 42,13
Log files : 1
Archives : 1 (0)
<
X 5 Main menu
8.9 Re-commisioning after standstill
For recommisioning, proceed as described in chapter 8.1: Commissioning.
NOTICE
Material or product damage!
Risk of injury or serious injuries.
f Before re-commisioning, make sure that the Hägglunds product or the
installation not has been damaged so that the original function is changed.
In case of accident or malfunction where it is not possible to determine the
implications for Hägglund product‘s tness, please contact your Bosch Rexroth
representative.
To Next Page
Loading...